Products art

CI5X Series Impact Crushers

CI5X series impact crusher is a new generation of coarse and medium crushed products designed to meet customers needs for high profit, low cost, energy saving and consumption reduction. It is the guarantee for large-volume production line c

Mining, metallurgy, construction, chemical, cement, refractory material, etc.


Model Specifications (mm) Feed opening (mm) Max. feed size (mm) Capacity (t/h) Power (kW) Weight (t) Dimensions (mm)
CI5X1315 Φ1300×1500 1540×930 600 250-350 250 20 2880×2755×2560
CI5X1520 Φ1500×2000 2040×520 (2040×995) 350(700) 400-600 2×250 (2×200) 30 3390×3520×2790
CI5X1415 Φ1400×1500 1540×1320 900 350-550 250 24 2995×2790×3090
CI5X1620 Φ1600×2000 2040×1630 1100 500-900 2×200 42 3485×3605×3720
CI5X2023 Φ2000×2300 2400×1920 1300 1200-2000 2×500 76 4890×4380×4765


  • Porous Asphalt - Asphalt Pavement

    While slightly coarser than standard asphalt, porous asphalt pavements are attractive and acceptable. Most people parking on a porous asphalt parking lot will not notice (or believe) that it is porous. The surface of a porous asphalt pavement is smooth enough to meet requirements of the Americans with Disabilities Act (ADA).

  • UNHSC Design Specifications for Porous Asphalt

    2016-7-21  Porous asphalt pavement refers to the compacted mix of modified asphalt, aggregate, and additives. C. The porous asphalt pavement specified herein is modified after the National Asphalt Pavement Association (NAPA) specification outlined in Design, Construction, and Maintenance Guide for Porous Asphalt Pavements, Information Series 131 (2003 ...

  • Porous Asphalt -

    Porous asphalt pavements allow for land development plans that are more thoughtful, harmonious with natural processes, and sustainable. They conserve water, reduce runoff, promote infiltration which cleanses stormwater, replenish aquifers, and protect streams. A typical porous pavement has an open-graded surface over an underlying stone ...

  • Porous Asphalt Pavement - WAPA

    2007-9-6  not recommended for evaluation of porous pavement sys-tems. Specific details on hydrological design are beyond the scope of this report. If a hydraulic connection is possible, porous asphalt pavement systems shall be located per the requirements of WDNR Conservation Practice Standards 1002, “Site Evaluation for Stormwater Infiltration,” and

  • Tech Brief: Porous Asphalt Pavements with Stone Reservoirs

    2016-6-24  asphalt mix placed atop a dense-graded pavement. Rainwater drains into the OGFC and then out the side of the pavement. Porous asphalt pavements use open-graded mixes placed atop a stone reservoir. Rainwater flows down through the open-graded mix layers into the stone reservoir where it can then infiltrate into the subgrade. Benefits and Limitations

  • Pavement Design

    Pavement Design Highway users have an increased awareness of pavement quality. To help agencies and contractors meet the demand for high-quality pavements, NAPA's Asphalt Pavement magazine regularly provides articles that directly address issues such as mix type selection and statistical specifications.. PaveXpress is a free, Web-based tool for the structural design of flexible and rigid ...

  • Evaluation of functional characteristics of laboratory

    Cited by: 2

    2008-9-5  Open-Graded Asphalt Pavement - An open-graded asphalt mix with that Unpaved Stone Edge - is porous, allowing storm water to flow through surface into stone recharge bed. A backup system in case the pavement surface should ever become sealed. Storm water can flow off pavement surface to stone edge and into stone recharge bed. NAPA NATIONAL ASPHALT


    2011-10-12  Why is this bad? Because the mix design requires a certain percentage of liquid, or film thickness and if you have excessive Drain Down, you are not getting this “Effective” asphalt in the finished mix. Controlling it Mix temperature, gradation, aggregate selection and a good mix design. This is critical to Porous Success!!!!

  • Asphalt Pavement Thickness and Mix Design - Asphalt ...

    Asphalt Pavement Thickness and Mix Design; While there are an infinite number of questions that can be asked, we compiled a list of those questions that have been directed to us the most. These FAQs are categorized into subject areas listed in the contents dropdown box below.

  • Improvement of Mix Design for Porous Asphalt: Road ...

    2000-12-4  ABSTRACT An improved mix design approach for porous asphalt is presented which is based on the packing theory for aggregate gradation optimisation, thus reducing the post-compaction effects of the pavement by traffic loads. The specimens produced by this mix design method were compared to a Swiss Standard mix from a job site. The results show that the theoretically designed mix

  • :: Pervious Pavement :: Pervious Concrete for Green ...

    2019-9-23  While pervious concrete can be used for a surprising number of applications, its primary use is in pavement. This site focuses on the pavement applications of the material, which also has been referred to as porous concrete, permeable concrete, no-fines concrete, gap-graded concrete, and enhanced-porosity concrete.

  • Porous Asphalt Pavements - NAPA Online Store

    Both the history of the technology and the latest large-scale projects, including innovative uses of porous pavements, are discussed. Topics covered include water quality, structural design, soil investigation, hydrologic design, materials, construction, cost, and maintenance.

  • The Right Choice for Porous Asphalt Porous Pavements

    2014-3-4  the porous asphalt pavement. All other installations cited in this article are asphalt pavements. Background First developed in the 1970s at the Franklin Institute in Philadelphia, porous asphalt pavement consists of standard bituminous asphalt in which the aggregate fines (particles smaller than 600 µ, or the No. 30 sieve) have been screened and

  • » Porous Asphalt Pavements

    Porous asphalt pavement, on the other hand, is a type of type porous pavement structure specifically designed to allow rainfall and runoff to flow into and through the pavement structure. Porous pavement offers the potential to collect and/or slow the rate of run-off from other impervious surfaces.

  • Porous Asphalt Pavements - California Coastal Commission

    2014-1-23  Phase I Porous: 40,300 sf of asphalt, 14,300 sf concrete, and 8300 sf of pavers Phase II Porous: two mix designs of porous asp (both 20,700 sf) and 12,100 sf of porous concre On-going quality and quantity monitoring by Kinnetic Labs Grant from the State of CaliforniCalifornia Water Resoua Water Resour Control Board (and County matching funds)

  • Structural Design Guidelines for Porous Asphalt

    The focus is on the structural design procedure and its required inputs using the AASHTO 93 Design Method. Site selection, hydrologic design, porous asphalt and asphalt-treated permeable base (ATPB) mixture design, construction, and maintenance are included only insofar as they impact structural design and performance.

  • Porous Asphalt Pavement Designs: Proactive Design for

    2019-4-3  and government agencies on the design of porous asphalt pavement structures. One of the keys to the success of this pavement type is in the design of the asphalt mix. The air void percentage, which is ultimately related to the effectiveness of the pavement to adequately control the runoff, is a critical component of the mix.

  • » Porous Asphalt Parking Lots

    For businesses and commuter lots, the design must consider the use of the pavement by buses, trucks and other heavy vehicles. This page addresses some basic considerations that should be evaluated in the design and construction of porous parking lots which are used to manage stormwater.

  • Asphalt Paving Design Guide - Asphalt Pavement

    2014-10-17  PREFACE APAO Design Guide This guide is published by the Asphalt Pavement Association of Oregon (APAO) for the use and benefit of designers. It covers a number of applications, including streets and driveways, commercial and industrial facilities and specialty


    2013-12-18  The porous asphalt slab was finally placed inside a locally fabricated water flow simulator to simulate a porous asphalt pavement system for parking lots. Keywords: Impermeable surfaces, Parking lot, Mix design, Porous asphalt, Water flow simulator. 1. Introduction Porous asphalt (PA) is an innovative road surfacing technology which allows


    2015-4-22  tentative mix design guidelines for ‘Porous Asphalt Pavement’. III METHODOLOGY The methodology adopted for study includes – selection of granite aggregates from the locality, test for its suitability and obtain a desired gradation as per NCAT gradation criteria for OGFC [1]. Marshall Specimens with 50 blows of compaction are

  • IAPA :: Porous Pavements -

    An open-graded asphalt surface with interconnected voids that allow stormwater to flow through the pavement into the stone recharge bed. Design. The general guidelines for the porous asphalt pavement design


    National Asphalt Pavement Association, "Porous Asphalt Pavement", National Asphalt Pavement Association, Lanham Maryland, 2003. J is a co-author for the paper born brought up in Bangalore.

  • Design and Construction of Porous Asphalt Pavements

    2 Slide 4 WSU Puyallup Technical Workshop Series-Permeable Paving Design April 23, 2013 8th Ave NW LID Retrofit Slide 5 WSU Puyallup Technical Workshop Series-Permeable Paving Design April 23, 2013 Porous Asphalt Pavement Overview •Site Design Considerations •Materials and Specifications •Construction Sequencing •Performance of Permeable Asphalt

  • Comparison of Mix Design Methods for Porous

    Since that time, there have been several other mix design procedures developed and adapted, mainly for OGFCs on high-volume roadways. In the past decade, porous asphalt pavements have been gaining popularity as a storm water best management practice and utilize similar mixtures as

  • Porous Pavements – Groundwater’s Best Friend -

    Porous asphalt pavements are specially designed and constructed to allow water to pass through the pavement surface and reenter the groundwater bed instead of diverting these flows into stormwater drains and sewers. In this edition of the RoadReady newsletter, we will focus on the construction and maintenance of porous asphalt pavements. Image courtesy Stormwater magazine


    2016-4-6  Porous asphalt pavement has to be designed to fulfill its structural and drainage requirements. In terms of the structural design aspect of the porous pavement (both un-reinforced and geosynthetics-reinforced), there is currently no strict design procedures that

  • What are the different tests taken on porous asphalt ...

    In the U.S., you will see some combination of the following tests for PFCs (porous friction courses). The list generally trends from more common to less common: 1. Air voids / bulking - Most agencies will require a minimum air void content to ensu...


    2016-4-6  Porous asphalt pavement has to be designed to fulfill its structural and drainage requirements. In terms of the structural design aspect of the porous pavement (both un-reinforced and geosynthetics-reinforced), there is currently no strict design procedures that

  • Porous Asphalt The Specs

    2015-3-10  Mix Design Class ½ HMA PG 70-22 Binder content shall be between 6.0% and 7.0% Void ratio of 16% to 25% Percent of two face fracture shall be greater than 90%. March 2015 Porous Asphalt -The Specs Washington Asphalt Paving Association 7 Sieve Size

  • Porous Asphalt Pavement Designs: Canadian Climate

    Porous Asphalt Pavement Designs: Canadian Climate Use. Porous asphalt pavements offer an alternative technology for stormwater management. A porous asphalt pavement differs from traditional asphalt pavement designs in that the structure permits fluids to pass freely through it, reducing or controlling the amount of run-off from the surrounding area.

  • Asphalt - Materials Construction Technology -

    Asphalt Pavement Recycling with Reclaimed Asphalt Pavement (RAP) Asphalt Mixture Performance Tester (AMPT) ... Porous Asphalt Pavements with Stone Reservoirs, FHWA-HIF-15-009 2015; ... A Review of Aggregate and Asphalt Mixture Specific Gravity Measurements and Their Impacts on Asphalt Mix Design Properties and Mix Acceptance, FHWA-HIF-11-033 2011;

  • Materials and Mix Design - :: Pervious Pavement

    2016-6-21  Materials and Mix Design . Pervious concrete uses the same materials as conventional concrete, with the exceptions that the fine aggregate typically is eliminated entirely, and the size distribution (grading) of the coarse aggregate is kept narrow, allowing for relatively little particle packing.

  • Mississippi Asphalt Pavement Association

    2 天前  Asphalt Fact #9 Smoother pavements extend pavement life by as much as 10% to 25%. Asphalt Fact #63 Asphalt is 100% renewable, but reclaimed concrete is just porous rock. Asphalt Fact #113 Often it is possible to route runoff from roofs and roads into the stone recharge bed of a porous parking lot.

  • DESIGN OF ASPHALT FOR - South African Road Federation

    2017-5-30  The revision of the South African Pavement Design Method (SAPDM) The increasing use of mix types that cannot be classified as conventional Hot-Mix Asphalt (HMA) and that require alternative design methods. Such mix types would include warm mix, cold mix, mixes with significant proportions of

  • Porous Asphalt Asphalt Pavement Association of

    2018-8-16  Porous asphalt pavement, on the other hand, is a type of type porous pavement structure specifically designed to allow rainfall and runoff to flow into and through the pavement structure. Porous pavement offers the potential to collect and/or slow the rate of run-off from other impervious surfaces.

  • Porous Asphalt, Santa Rosa, California -

    2019-10-23  Porous asphalt, which is used mostly for paving parking lots, is a popular choice in building projects because of its many benefits and its environmentally friendly design. What is Porous Asphalt? Porous or Permeable Asphaltic Pavement offer developers and planners a

  • UNHSC Design Specifications for Porous Asphalt Pavement ...

    2012-5-6  Porous asphalt pavement refers compactedmix modifiedasphalt, aggregate, porousasphalt pavement specified herein modifiedafter NationalAsphalt Pavement Association (NAPA) specification outlined Design,Construction, MaintenanceGuide PorousAsphalt


    When we get your inquiries, we will send tailored catalogue, pricelist, delivery, payment terms and other required details to you by email within 24 hours.

    * *

    The materials of processing: *

    • Granite
    • Limestone
    • Basalt
    • Pebble
    • Gravel
    • Gypsum
    • Marble
    • Barite
    • Quartz
    • Dolomite
    • Gold Ore
    • Copper ore
    * *